TRADE NEWS
Professional Solution Provider for Various Industrial Applications.
Language
Professional Solution Provider for Various Industrial Applications.
Everyone is very familiar with the BGA repair table. Recently, a large number of customers have purchased the BGA repair table from me. So Xiaobian here reminds you that you must remember the safety rules of the BGA repair table! Xiaobian here to explain to you:
In order to ensure personal safety, the main switch of the machine must be turned off after using the BGA repair table. If the machine is not used for a long time, please unplug the power cord.
Must use the original factory approved or recommended parts, otherwise will lead to serious consequences.
Machine faults must be repaired by professionals or our designated personnel.
The BGA repair table uses a three-wire grounding plug, which must be inserted into a three-hole grounding socket. Do not change the plug or use an ungrounded three-head adapter to make bad contact.
After the BGA repair table is opened, the temperature may reach more than 400 degrees. Do not use it near flammable or explosive gas or objects. Do not touch the metal part of the soldering iron to prevent burns.
When installing or replacing parts, it must be done after the BGA repair table is closed. It must be cooled before installation or replacement.
So the above is about the use of BGA repair table safety code introduction, Da Tai Feng Xiaobian hope to help you
BE MY FRIEND:
Check out my email address: dtf2009@dataifeng.cn
warning! are you avoiding Professional BGA Repair Station Manufacturer mistakes?
#dataifeng #BGA rework station #manufacturer #factory #factorywork
Founded in March 2009, Shenzhen Dataifeng Technology Co., Ltd.
