Everyone is very familiar with the BGA rework table. Recently, a large number of customers have purchased the BGA rework table from me. So I would like to remind you that you must remember the safety rules for the use of the BGA repair table!In order to ensure personal safety, the main switch of the machine must be turned off after using the BGA repair table. If it is not used for a long time, please unplug the power cord.Parts approved or recommended by the original manufacturer must be used, otherwise serious consequences will be caused.Machine faults must be repaired by professionals.
The BGA rework station uses a three-wire grounding plug, which must be inserted into a three-hole grounding socket. Do not change the plug or use an ungrounded three-head adapter to cause poor contact.After the BGA rework station is turned on, the temperature may reach more than 400 degrees. Do not use it near flammable and explosive gases and objects. Do not touch the metal part of the soldering iron to prevent scalding.Parts must be installed or replaced after the BGA rework station is closed and after cooling.So the above is about the BGA rework table safety rules for the use of the introduction, hope to help you oh ~
BE MY FRIEND:Check out my email address: firstname.lastname@example.org!are you avoiding Professional BGA Repair Station Manufacturer mistakes?#dataifeng #BGA rework station #manufacturer #factory #factorywork