With the development of technology, in this era of BGA repair equipment has gradually replaced the wind gun, we need to spend more efforts when selecting BGA equipment. So what should we pay attention to when choosing this kind of product? To solve this problem, we have divided the following content into six points for you to answer.
Note one: from the machine operation control system to consider
The operation control system of the machine generally has instrument, touch screen, computer control. The operation of the instrument is too complicated, the price of the computer is relatively expensive, and the touch screen is relatively practical.
Note two: from the BGA chip size to consider
Choose the right size machine for the BGA chip, the bigger the better.
Note three: Select by temperature accuracy
As we all know, temperature accuracy is the core of BGA repair equipment, and the industry standard is plus or minus 3 degrees. The smaller the temperature difference, the better, you can use the furnace temperature tester simulation test.
Note four: the upper infrared heating equipment can be selected
On this recommendation, mainly because there are many kinds of BGA, the classification is wide, to deal with a variety of different BGA, the requirements of convenience, precision, high efficiency, it is recommended to choose the upper infrared heating equipment.
Note five: by making plate area to choose
If the plate area is too small, the board can not be well preheated, it is easy to cause deformation, foaming, yellowing, fault and other problems. So when choosing BGA equipment, it is necessary to choose the plate area.
Note six: Warm area of the equipment
Different temperature zones can be applied to different ranges. For example, the three temperature zone is the upper and the lower part of the BGA chip for local heating, the bottom for the whole plate preheating. Two temperature zone less lower temperature zone, do small or simple BGA chip success rate is OK, like iron shell package or BGA chip is relatively large, two temperature zone is difficult to meet.
After the introduction of the above six matters, is it more directional when you choose BGA repair equipment?
BE MY FRIEND:
Check out my email address: firstname.lastname@example.org
warning! are you avoiding Professional BGA Repair Station Manufacturer mistakes?
#dataifeng #BGA rework station #manufacturer #factory #factorywork