From the point of view of the production and application of BGA rework table, Dataifeng Technology takes you to understand from the aspects of efficiency, use degree, operation difficulty, safety and success rate.1. In terms of efficiency, the optical BGA rework table eliminates the manual focusing process. In the operation of workers, the optical BGA rework table can automatically disassemble and assemble BGA chips as long as the parameters are adjusted. However, the traditional non-optical BGA rework station constantly requires rework personnel to pay attention to PCB screen printing line and point alignment in order to achieve alignment rework. In terms of efficiency, the optical BGA rework station is much higher than the traditional BGA rework station.2. In terms of the degree of use, with the increasing use of BGA and the complexity of BGA, the requirements for rework equipment are also getting higher and higher. Therefore, in the future, the BGA rework table has to be constantly updated to meet the needs of the market, and the traditional non-optical BGA rework table will eventually be eliminated. At this time, it is necessary to buy a good optical BGA repair table.3, in term of operation difficulty, that optical BGA reworking table is easy to operate, is automatically operate in the whole process, has almost no technical requirements on reworking personnel, has one-key operation of automatic weld, disassembly, mounting and feeding, and is simple to use and convenient to operate; Configuration of laser red dot positioning, for different repair products, to achieve rapid conversion, without setting cumbersome parameters, so in this study as long as you can computer, it is not a thing.However, the traditional non-optical BGA rework table has high requirements for operators. For larger BGA chips, even skilled maintenance personnel sometimes have a hard time reworking, so we can see the difference in operation between the two.And 4, in term of safety and success rate, that full-automatic optical BGA rework table adopts the split prism to image through the optical module, so manual alignment is not need, and the possibility that the BGA chip is damaged due to improper traditional manual alignment operation is saved. The intelligent operation equipment for visual alignment, welding and disassembly of BGA components of different sizes can effectively improve the repair rate and productivity and greatly reduce the cost. To sum up, the optical alignment BGA rework station is much better than the traditional non-optical BGA rework station.
BE MY FRIEND:
Check out my email address: firstname.lastname@example.org
warning! are you avoiding Professional BGA Repair Station Manufacturer mistakes?
#dataifeng #BGA rework station #manufacturer #factory #factorywork